Views:86 Author:Site Editor Publish Time: 2020-06-28 Origin:Site
Introduction: Artificial turf has the advantages of bright appearance, green all seasons, vivid, good drainage performance, long service life, low maintenance cost, etc. So how should the artificial turf be repaired and maintained? This article mainly introduces the maintenance method of artificial turf.
In order to keep the artificial turf stadium clean, debris discarded by athletes or spectators must be removed in time. In order to prevent soil particles from being brought into the lawn, a fixed road to and from the sports ground must be designed in advance. Once the soil is brought into the site, it should be removed as soon as possible to prevent it from slowly accumulating between the fibers of the turf.
When removing the soil on the lawn, the method of washing with warm water with common detergent can be used. Regardless of whether it is scrubbed with a felt brush or a cotton mop, if detergent is used, it should be thoroughly rinsed with plenty of water after wiping off the dirt.
The lawn of the sports field must be planned and designed according to the requirements, that is, to draw some long-term lines according to the requirements, but if these lines are permanently scribed, then for the sports field that can be used for a variety of games This is very unfavorable, because most artificial turf are versatile.
Artificial turf, like natural turf, also needs regular inspections. At least 1 or 2 comprehensive inspections should be carried out in a year to accurately determine which areas need to be repaired in a timely manner. If the turf is overused or its service life exceeds 5 years, It requires a comprehensive inspection twice a year.
Artificial turf cannot tolerate long-term heavy pedaling load. For example, it is common to train, gather, hold open-air music evenings and perform acrobatic performances on the lawn of sports fields. This can easily cause excessive pressure and cause damage to the lawn. In order not to damage the lawn under the above circumstances, the static load pressure for a long time cannot exceed 1.2~1.4kpa. In order to prevent the harm of excessive static load pressure, plywood with a length and width of 1.22m×2.44m and a thickness of 19mm should be laid on the section where static load pressure may be generated, so that people and objects that generate static load pressure are on the plywood.
Under hot weather conditions, the temperature of the artificial turf will rise rapidly. If a certain amount of evaporation can be maintained, the temperature of the artificial turf can be kept close to the natural turf temperature. Keeping the lawn moist in this way can not only reduce the wear on the lawn, but also reduce the possibility of serious accidents. The lawn with friction can weaken the elasticity of the ball. In the water supply operation to maintain the moisture of the lawn, spray water It must be uniform and appropriate, so that the turf can maintain sufficient humidity, and the turf cannot be submerged by water or form small pits on the lawn.